Description
One barista’s tamp is never another’s
On a busy counter, tamping pressure drifts shift to shift, hand to hand — and every drift shows up as an uneven shot. The CinoArt PTB automatic coffee tamper removes that variable entirely, applying the same measured force to every basket, every time.
Precision without the guesswork
The PTB sits directly under the grinder, tamping each dose the instant it lands in the portafilter. Its Guide Leveling System (GLS) keeps the tamper head parallel to the basket rim, so pressure is distributed edge to edge instead of concentrated in the centre. The result is a level, repeatable puck that lets water find the path the barista intended, not the path an uneven tamp created.
Built for volume and consistency
- Identical pressure and depth on every single shot
- Patented GLS eliminates channeling at the edges of the puck
- Program single, double, or triple tamp cycles independently
- Widest pressure range in its class, from 2kg to 38kg
- Anti-static, non-stick coating keeps grounds from clinging
- Cast-alloy body engineered for daily commercial use
What sets the PTB apart
Guide Leveling System
Keeps the tamper head perfectly parallel to the basket for uniform, edge-to-edge compression on every dose.
2kg – 38kg pressure range
The broadest tamping range available, letting a café dial in force per blend, roast, or basket size.
Multi-cycle tamping
Set single, double, or triple tamp sequences, with independently controlled force per cycle.
Grinder-friendly footprint
At 276mm x 192mm x 232mm, it clears space beneath grinders like ANFIM SCODY, SP II+, and Mythos 1 & 2.
Anti-static coating
Non-stick, anti-static finish keeps coffee grounds from clinging to the tamper face between cycles.
Cast-alloy construction
A durable body built to withstand continuous, high-volume café operation without losing calibration.
See the automatic coffee tamper at work
Watch the GLS system and multi-cycle tamping in a real workflow.
Full technical specification
- Pressure Range: 2kg – 38kg
- Tamping Modes: Single, Double, Triple (independent pressure per cycle)
- Voltage: 240V / 10A (Transformer Output: 12V DC)
- Tamper Diameter: 58.3mm (standard)
- Dimensions: 276mm (W) x 192mm (H) x 232mm (D)
- Weight: 5kg
- Compatibility: Fits under grinders including ANFIM SCODY, SP II+, Mythos 1 & 2
Café counter or serious home bar
On a café counter running back-to-back tickets, the PTB’s multi-cycle programming and 38kg ceiling handle high-volume service without a drop in consistency. For a dedicated home setup built around a commercial-grade grinder, it brings café-level repeatability to a smaller daily grind, useful for anyone dialing in a single bean carefully over many shots.
Frequently asked questions
Does the PTB fit any grinder?
It is designed to work under most commercial portafilter grinders and is confirmed compatible with models like ANFIM SCODY, SP II+, and Mythos 1 & 2. Check clearance dimensions (276mm W x 192mm H x 232mm D) against your grinder before installing.
What tamper size does it use?
The standard tamper head is 58.3mm in diameter, matching most commercial portafilter baskets.
Can I run different pressure for double or triple tamps?
Yes. Each tamp cycle in a multi-tamp sequence carries its own independently set pressure, from 2kg up to 38kg.
What power supply does the PTB need?
It runs on 240V / 10A mains, stepped down through an included transformer to 12V DC.
How do I keep the tamper head clean?
The anti-static, non-stick coating resists coffee ground build-up; a dry wipe after each session is generally sufficient to keep the surface clean.
Who the CinoArt PTB is built for
This automatic coffee tamper suits high-volume café counters that need identical shots across every barista and shift, as well as serious home setups paired with a commercial grinder where repeatable tamping matters more than manual technique.
Reviews
There are no reviews yet.