Description
One Grinder, Every Brew Method
Most Indian cafés and home bars juggle two grinders—one for espresso, one for filter. The Mahlkönig X54 grinder replaces both with a single stepless burr set that moves cleanly from ristretto to pour-over.
Precision Without the Guesswork
Stepless adjustment means every gram of dose lands with the same particle distribution, brew after brew. Stainless-steel burrs hold their edge through daily café volume, and a digital timer takes dosing variance out of the hands of whoever is behind the counter.
What You Get
- Stepless grind adjustment from fine espresso to coarse French press
- 54 mm special-steel flat burrs for consistent particle size
- 1050 RPM motor tuned for silent, low-heat grinding
- Digital timer for repeatable, hands-free dosing
- Compact footprint suited to tight counters and home kitchens
Mahlkönig X54 Grinder: The Specs That Matter
Stepless Adjustment
Dial from espresso to French press without click-stops, so grind size matches the bean and the brew method exactly.
54 mm Special Steel Burrs
Flat burrs machined from special steel hold a sharp edge for consistent, high-yield extraction over time.
1050 RPM Motor
A quiet, low-RPM motor grinds at approx. 1–2.8 g/s, keeping heat and noise down during back-to-back shots.
Digital Timer
Set dosing by time, not guesswork, for a consistent cup whether it’s the first order or the fiftieth.
Rated Throughput
Built to a rated duty cycle of approx. 500 kg, engineered for sustained daily use on a café counter.
Compact Footprint
Available in Black or White finishes, sized to fit under most kitchen cabinets and café backbars.
Choose Your Hopper Size
Both configurations share the same 54 mm burr set, motor, and digital timer—only hopper capacity and footprint change.
| Specification | 250 g Chrome Hopper | 500 g Chrome Hopper |
|---|---|---|
| Hopper Capacity | 250 g | 500 g |
| Dimensions (W x D x H) | 19 x 37.8 x 28 cm | 19 x 42.5 x 28 cm |
| Finish Options | Black, White | Black, White |
| Best Suited For | Home bars, tight counters | Small café counters, higher volume |
Mahlkönig X54 Grinder: Technical Specification
- Burr type: 54 mm flat burrs, special steel
- Motor speed: 1050 RPM
- Grind rate: approx. 1–2.8 g/s
- Rated throughput: approx. 500 kg
- Hopper options: 250 g or 500 g, with chrome grinder finish
- Finish: Black or White
- Dimensions (250 g hopper): 19 x 37.8 x 28 cm
- Dimensions (500 g hopper): 19 x 42.5 x 28 cm
- Packed dimensions: 52 x 34 x 26 cm
- Net weight: 5.1 kg
- Packed weight: 8 kg
Mahlkönig X54 Grinder: Frequently Asked Questions
Is the Mahlkönig X54 grinder suitable for espresso and filter coffee?
Yes. Its stepless adjustment covers the full range from fine espresso to coarse French press and pour-over.
How loud is the X54 during grinding?
It is engineered for silent operation, making it suitable for home kitchens as well as café counters.
Which hopper size should I choose?
The 250 g hopper suits home bars and tighter counters; the 500 g hopper suits small cafés with higher daily volume.
What burrs does the X54 use, and how long do they last?
It uses 54 mm flat burrs made from special steel, chosen for edge retention and consistent particle distribution over sustained use.
Can the X54 handle daily café volume?
Yes. It carries a rated throughput of approx. 500 kg, built for sustained daily grinding rather than occasional home use alone.
Built for the Counter Between Home and Café
The Mahlkönig X54 grinder suits serious home brewers who want café-level consistency, and small café counters that need one dependable grinder for espresso and filter service alike.
Reviews
There are no reviews yet.