Description
Every espresso begins with a decision measured in microns
Inconsistent grind size is the silent flaw behind flat, sour, or bitter shots — a problem every serious café and home barista in India eventually meets. The Fiorenzato AllGround Grinder removes that variable with titanium-coated precision burrs built for repeatable, professional results.
Built around a single obsession: consistency
Fiorenzato designs and manufactures its own burr sets in-house, rather than sourcing generic components. The AllGround’s 64mm flat burrs are milled from M340 steel and finished with a titanium coating, a combination chosen for heat resistance and edge retention under continuous café use. The result is a grinder that holds its particle-size distribution steady, shot after shot, without drifting as burrs warm up during a busy service.
Precision by design
- Ring nut micrometric adjustment with continuous, stepless control
- Titanium-coated M340 steel burrs milled and produced by Fiorenzato
- Adjustable fork with support for consistent portafilter alignment
- Dose set in seconds for fast bar-to-bar workflow changes
Facts that matter behind the counter
64mm Titanium Burrs
Flat burrs, Ø64mm, M340 steel with titanium coating for maximum performance across every granulometry.
250W Motor
Burr revolutions run at 1400/min on 50Hz supply and 1600/min on 60Hz, matched to standard Indian mains.
Stepless Adjustment
Ring nut micrometric control gives continuous grind-size adjustment, not fixed clicks.
250g Hopper
Compact bean hopper suited to counters with limited footprint, rated for up to 1kg of daily consumption.
9kg Build
Net weight of 9kg with a footprint of 169 x 440 x 240mm keeps it stable during high-volume grinding.
1400kg Burr Life
Rated burr lifespan of 1400kg of coffee before replacement is recommended.
Technical specifications
- Grinding adjustment: Ring nut, micrometric, continuous
- Fork: Adjustable, with support
- Power: 250 watts
- Burrs type: Flat with titanium coating
- Burrs diameter: Ø64mm
- Burrs revs: 1400/min (50Hz) – 1600/min (60Hz)
- Dose adjustment: In seconds
- Coffee bean hopper capacity: 250g
- Net weight: 9kg
- Dimensions: 169 x 440 x 240mm
- Recommended consumption: Up to 1kg per day
- Burr life: 1400kg
Compare AllGround finishes
| Finish | SKU | Body Material | Best Suited For |
|---|---|---|---|
| Matt Black | SGF00021M0 | Matt-finish metal body | Café counters and minimal home setups |
| Matt White | SGF00081M0 | Matt-finish metal body | Bright specialty bars and light-toned interiors |
| Walnut Wood and White | — | Walnut wood accent with white body | Home bars and design-forward retail counters |
Watch the AllGround in action
Frequently asked questions
How often do the burrs need replacing?
Fiorenzato rates the titanium-coated burrs for approximately 1400kg of coffee before performance drops. For a single-group café pulling steady volume, this typically means years of service before a burr change is needed.
Is the AllGround suitable for high-volume café use?
Yes. It is rated for up to 1kg of coffee consumption per day, making it appropriate for a busy home bar or a low-to-mid volume specialty counter running one or two group heads.
Can I fine-tune the grind for both espresso and filter?
The ring nut adjustment is continuous rather than stepped, so you can dial in a precise setting anywhere between fine espresso and coarser filter grinds without jumping between fixed points.
Does it work on Indian electrical supply?
Yes. The 250W motor runs the burrs at 1400rpm on 50Hz mains, which is the standard supply frequency across India.
Which finish should I choose?
Matt Black and Matt White suit most café counters and match stainless or minimal setups. The Walnut Wood and White finish is intended for home bars and design-led spaces where the grinder is also a visible object.
Built for the counter that can’t afford a bad grind
The Fiorenzato AllGround Grinder is suited to home baristas who have outgrown entry-level grinders and to specialty cafés that need dependable, repeatable output without a full commercial footprint. Anyone weighing consistency against convenience will find its titanium burrs and stepless adjustment built to hold their ground, shift after shift.
Reviews
There are no reviews yet.